Maker Feed Electronics, DIY, Makers, Hackers and Internet of Things (IoT)

  • Latest Articles
  • Popular
  • News
  • Blogs
  • Platforms
  • Automation
  • Stores
  • Podcasts
Home » Blogs »

Writing a Linux Kernel Module — Part 2: A Character Device

From derekmolloy.ie 8 years ago in Blogs

Introduction In this series of articles I describe how you can write a Linux loadable kernel module (LKM) for an embedded Linux device. This is the second article in the series — please read “Writing a Linux Kernel Module — Part 1: Introduction” before moving on to this article, as...

Articles from Derek Molloy

Writing a Linux Kernel Module — Part 3: Buttons and LEDs

From derekmolloy.ie 8 years ago in Blogs

Introduction In this series of articles I describe how you can write a Linux loadable kernel module (LKM) for an embedded Linux device. This is the third article in the series — please read: Writing a Linux Kernel Module —...

Writing a Linux Kernel Module — Part 1: Introduction

From derekmolloy.ie 8 years ago in Blogs

Introduction In this series of articles I describe how you can write a Linux kernel module for an embedded Linux device. I begin with a straightforward “Hello World!” loadable kernel module (LKM) and work towards developing a module that can...

“Hello World!” Introductions to CMake

From derekmolloy.ie 8 years ago in Blogs

Introduction This post provides a straightforward set of “Hello World!” introductions to using CMake for building C++ projects. All steps are performed using Linux on the BeagleBone platform, but the instructions are relevant to most Linux platforms. The make utility and Makefiles...

CGI using C++ on the BeagleBone (Ggicc)

From derekmolloy.ie 8 years ago in Blogs

Exploring BeagleBone: Tools and Techniques for Building with Embedded Linux

From derekmolloy.ie 9 years ago in Blogs

This is what is keeping me busy at the moment… (very, very busy!). I have presently drafted 9 of the 14 chapters. This book on the BeagleBone is due for publication in Dec. 2014. A provisional description is available at: http://www.amazon.com/Exploring-BeagleBone-Techniques-Building-Embedded/dp/1118935128/ Derek....

Analog Discovery: Getting Started with the Analog and Digital Tools

From derekmolloy.ie 9 years ago in Blogs

Introduction I recently purchased the Digilent Analog Discovery and this is my first post on the tools that are available. I wrote this as a set of blog posts, but I have now replaced this with a full video on...

Analog Discovery: Getting Started with the Logic Analyzer and Digital Pattern Generator

From derekmolloy.ie 9 years ago in Blogs

Introduction I recently purchased the Digilent Analog Discovery (Revision C). In this post I am looking at the Digital features, in particular the Pattern Generator and Logic Analyzer functionality. Test Circuit Setup For this test circuit I am going to use...

Beaglebone: Controlling the on-board LEDs using Java

From derekmolloy.ie 9 years ago in Blogs

I have posted on how to do this exact thing using C++, so the first half is cut-and-pasted from Beaglebone: Controlling the on-board LEDs using C++ Introduction One of the first things you would like to do when you connect...

Beaglebone: Controlling the on-board LEDs using C++

From derekmolloy.ie 9 years ago in Blogs

Introduction One of the first things you would like to do when you connect to the Beaglebone Black is see that you are having an impact on the hardware. In this short post I am going to look at how...

Running Java Applications on the Beaglebone Black

From derekmolloy.ie 9 years ago in Blogs

Before you start: First check if the distribution has changed to have a package installation of open java – Perform: [crayon-544e6faaef1f8168832857/] And see the output after you search for java [crayon-544e6faaef201679910846/] There are libraries and javascript tools, but no core...

About Maker Feed

We feature articles by the greatest makers, hackers and DIY enthusiasts from around the web. All websites and feeds are featured in the Feeds widget below.

Subscribe

  • Twitter
  • Facebook
  • Flipboard
  • RSS Feed

Feeds in Blogs

  • Dr. Gough Lui Subscribe
  • RTL-SDR Subscribe
  • Conor Patrick Subscribe
  • Docker Pirates Subscribe
  • Becky Stern Subscribe
  • Igor Pecovnik Subscribe
  • Lucky Resistor Subscribe
  • Board DB Subscribe
  • Kaspars Dambis Subscribe
  • Tinkerman Subscribe
  • All About Circuits Subscribe
  • Jara’s Spare Time Electronics Subscribe
  • Wade Wegner Subscribe
  • Sprites mods Subscribe
  • BEEKn Subscribe
  • Krebs on Security Subscribe
  • Gough’s Tech Zone Subscribe
  • airfy Inc. Subscribe
  • Johan Kanflo Subscribe
  • Hackaday Subscribe
  • import Subscribe
  • Matthew Petroff Subscribe
  • Mike’s Hardware Experiments Subscribe
  • Dan Strother Subscribe
  • Dimme’s World Subscribe
  • Neil’s Log Book Subscribe
  • Chris Stubbs Subscribe
  • Wolf Paulus Subscribe
  • IoT M2M blog Subscribe
  • MotoBrain Subscribe
  • Nootropic Design Project Lab Subscribe
  • electronut Subscribe
  • Bits on a Board Subscribe
  • Geoffrey Subscribe
  • Martin Harizanov Subscribe
  • Jeremy Blum Subscribe
  • My 2µF Subscribe
  • Tim’s Blog Subscribe
  • Paul’s Electronics Subscribe
  • Nathan Chantrell Subscribe
  • Limpkin’s blog Subscribe
  • Embedded Day Subscribe
  • Provide Your Own Subscribe
  • Miguel Grinberg Subscribe
  • Misc. Projects & Random Useless Stuff Subscribe
  • KOBAKANT Subscribe
  • Oona Räisänen Subscribe
  • Projects from Tech Subscribe
  • JeeLabs Subscribe
  • Dhakajack Subscribe
  • Evil Mad Scientist Laboratories Subscribe
  • Raspberry Pi @ Gadgetoid Subscribe
  • Derek Molloy Subscribe
  • Electronics-Lab.com Blog Subscribe
  • LowPowerLab Subscribe
  • bildr Subscribe
  • Łukasz Wieczorek Subscribe
  • maniacbug Subscribe
  • Tinkerlog Subscribe
  • JulietMikeBravo Subscribe

Maker Feed