Maker Feed Electronics, DIY, Makers, Hackers and Internet of Things (IoT)

  • Latest Articles
  • Popular
  • News
  • Blogs
  • Platforms
  • Automation
  • Stores
  • Podcasts
Home » News »

A deep dive into Raspberry Pi Zero 2 W’s power consumption

From www.cnx-software.com 1 year ago in News

When I completed my review of Raspberry Pi Zero 2 W, I mentioned I would test the power consumption of the board later. It took a while, but I’ve finally come around it using Otii Arc from Qoitech and Otii software to provide some pretty power consumption charts, and even...

Articles from CNXSoft

Tiny RASynBoard combines Renesas RA6M4 MCU with Syntiant NDP120 ML accelerator, WiFi & BLE module, and some sensors

From www.cnx-software.com 7 hours ago in News

Avnet RASynBoard is a tiny board that packs a lot of features in a 30x25mm form factor with a Renesas RA6M4 Cortex-M33 microcontroller, a Syntiant NDP120 Neural Decision Processor, a Renesas (Previously Dialog Semi) DA16600 Wi-Fi 4 & Bluetooth 5.1...

Rockchip RK3588M automotive-grade AI SoC supports up to 16 camera inputs

From www.cnx-software.com 12 hours ago in News

Rockchip RK3588M is an automotive-grade variant of the Rockchip RK3588 octa-core Cortex-A76/A55 SoC that supports at least 6 Full HD displays and 16 camera inputs and can simultaneously run the car dashboard, in-vehicle infotainment, a digital rearview mirror, headrest monitors,...

CM4 Maker Board review – Part 1: specifications, unboxing, and first boot

From www.cnx-software.com 24 hours ago in News

Cytron CM4 Maker Board is a carrier board for the Raspberry Pi CM4 or CM4 Lite system-on-module with plenty of I/Os, support for one M.2 NVMe SSD, and RTC backup battery, a buzzer, and various LEDs for GPIO status that...

Arduino UNO R4 Renesas RA4M1 32-bit maker board offered with optional ESP32-S3 WiFI & BLE module

From www.cnx-software.com 1 day ago in News

Arduino have launched an upgrade to their 8-bit Arduino UNO R3 board with the Arduino UNO R4 featuring a 48 MHz Renesas RA4M1 Arm Cortex-M4F 32-bit microcontroller, and an optional ESP32-S3 module for WiFi 4 and Bluetooth 5.0 connectivity. The...

Getting Started with GL-S200 Thread Border Router kit

From www.cnx-software.com 2 days ago in News

Last week we checked out the hardware for the GL.iNet GL-S200 Thread Border Router kit with three nRF52840 Thread Dev Boards, and I’ve now had time to work with the kit, so I’ll report my getting started experience in the...

Plasma Stick 2040 W adds RGB LED strip controller to Raspberry Pi Pico W board

From www.cnx-software.com 3 days ago in News

Pimoroni Plasma Stick 2040 W is a “Pico W Aboard” kit that adds a 5V RGB LED strip controller to the Raspberry Pi Pico W board, as well as a Reset button, and a Qwiic/STEMMA QT connector for expansion. Plasma...

MIPI CSI camera works with Intel Atom x7000, Processor, and Core i3 Alder Lake-N processors

From www.cnx-software.com 3 days ago in News

Most Intel processors do not come with a MIPI CSI camera, but some Alder Lake-N processors do, and Leopard Imaging has designed the LI-ADL-ADP-IMX415-MIPI-081H MIPI CSI camera module that is compatible with the Intel ADL-N CRB (Alder Lake-N Customer Reference...

Framework modular laptop adds Intel Raptor Lake, AMD Ryzen motherboards, 16-inch laptop frame

From www.cnx-software.com 3 days ago in News

When we first covered the Framework modular laptop in 2021 it came with a choice of 11th generation Intel Tiger Lake Core processors, up to 64GB RAM, up to 4TB SSD storage, a 13.5-inch display, a Full HD webcam, and...

OSD62x SiP combines TI AM62x processor with LPDDR4, EEPROM, PMIC, and passives into a single package

From www.cnx-software.com 4 days ago in News

Octavo Systems OSD62x is a system-in-package (SiP) combining the Texas Instruments AM62x processor with LPDDR4 RAM, EEPROM, power management, oscillators, and passive components, plus optional features such as an RTC and an 8-channel ADC. At least that’s true for the...

100ASK-T113-Pro Allwinner T113-S3 industrial board, and Allwinner T113-S4 with 256MB DDR3

From www.cnx-software.com 4 days ago in News

Last year, Jean-Luc introduced the T113-S3 processor and the small MangoPi-Dual board with T113-S3. This time, I will introduce a development board with relatively rich resources, the 100ASK-T113-PRO, which consists of a core board with T113-S3 and a carrier board...

About Maker Feed

We feature articles by the greatest makers, hackers and DIY enthusiasts from around the web. All websites and feeds are featured in the Feeds widget below.

Subscribe

  • Twitter
  • Facebook
  • Flipboard
  • RSS Feed

Feeds in News

  • All About Circuits Subscribe
  • CNXSoft Subscribe
  • Circuit Cellar Subscribe
  • EETimes Subscribe
  • HackerBoards (LinuxGizmos) Subscribe
  • DesignSpark Subscribe

Maker Feed